Striproll Garage Panel™ 855 is a roll-formed garage and all-purpose cladding profile, made from modern high-tensile BHP steel and is custom cut to length up to 5 metres long.
Garage Panel is especially suited to cladding Garages and small sheds. Garage Panel covers 855 mm with a rib height of 13 mm.
Garage panel is recommended as a wall cladding and should not be used as a roofing sheet.
Maximum allowable support spacings:
BMT |
Overhang |
Wall single |
Wall end |
Wall Internal |
.35 |
150 |
1200 |
1500
|
1700 |
.42 |
150 |
1500 |
1800
|
1800
|
Availability:
(1) BHP Zincalume conforming to Australian standard AS1445-AZ150,
(2) BHP Colorbond material conforming to AS 1445-AZ150 and AS 2728.
(3) Galvanized Zinc Hi-Ten G550-Z450.
Fixing:
Fix to valley of sheet approx. 10 mm to rib edge. One fastener per pan and one per lap.
Use two fasteners per pan for exposed locations. Ensure that when sheets are lapped that the joint is always in the pan and not on the rib.
Fasteners available in standard colours. Non standard colours may be subject to longer lead times. Do not locate fasteners less than 25 mm from ends of sheets.
Recommended screws |
wood |
steel |
Valley fix (walling & fencing) |
Buildex 12 x 25 type 17 |
(1) Buildex 10 x 16mm tek(wafer or hex) |
Manufacturing Tolerances:
Length
|
+5mm
|
-5mm
|
Coverage
|
+2mm
|
-5mm
|
Rib Hight
|
+1mm
|
-1mm
|
Ordering:
Please specify base metal thickness,colour,sheet length,sheet quantity,delivery or pick up,and date preferred for delivery/pick up.